RUS | ENG | ESP | FR | 中文

Mounting kits for fuel flow meters.


Mounting kits are designed for installing the fuel flow meters DFМ into the fuel system using fuel pipe (Ø=8 mm and Ø=10mm).


To ensure minimal resistance to the fuel flow it is recommended to use mounting kit № 4, designed for the fuel pipe with a diameter 10 mm.


Attention! The longevity and accuracy of fuel flow meters depend on mounting kit components quality.		 Mounting_kit_for_fuel_flowmeter
HIGH QUALITY MOUNTING KIT
Application

Kit №2   Kit №4   MK DFМ DIFF-01
Multipurpose, fuel pipe Ø=8 mm   Multipurpose, fuel pipe Ø=10 mm   For differential flow meters, fuel pipe Ø=10 mm
 
Features

  • sealing washers are made from a high quality soft copper (not aluminum!);
  • drive type nipples are made from steel (not aluminum!);
  • nipples, valves, hollow screws have bores for sealing;
  • mounting kit components have corrosion protection.
Specification
View Part name Description Kit №2 Kit №4 MK DFM DIFF-01
Hollow screw 026 Hollow screw 026 For connecting single fuel pipe using drive type nipple with fuel system units: high pressure fuel pump or fine filter. 3 3 6
Hollow screw 027 Hollow screw 027 For connecting two fuel pipes using drive type nipples with fuel system units: high pressure fuel pump or fine filter. 1 1 -
Screw M8X16 Screw M8х16 For fastening the meter to the bracket. 4 4 4
Nut M8 Nut M8 For fastening the meter to the bracket. 4 4 4
Flat washer 8 Flat washer 8 For fastening the meter to the bracket. 4 4 4
Spring washer 8.65 G Spring washer 8.65G For fastening the meter to the bracket. 4 4 4
Copper sealing washer D18 Copper sealing washer D18 For sealing the connections between the components. 16 16 16
Copper sealing washer CU 2026 Copper sealing washer CU 2026 For sealing the connections between the components. 1 1 -
Non-return valve K1 (white valve) Non-return valve K1 (white valve) For avoiding the hydraulic shocks effect on the meter measuring accuracy. 0.35-0.5 Atm. 1 1 2
Bypass valve K2 (red valve) Bypass valve K2 (red valve) For dissipating on the output of high pressure fuel pump. 1 1 -
Drive type nipple TR10 Drive type nipple TR10 For connecting the fuel pipe Ø=10 mm with fuel system units. - 8 8
Drive type nipple TR8 Drive type nipple TR8 For connecting the fuel pipe Ø=8 mm with fuel system units. 8 - -
Hose clamp 008 Hose clamp 008 For fixing the fuel pipe on the drive type nipple. 8 8 8
Nipple 012 Nipple 012 For connecting the fuel line to return fuel line through a bypass valve. 1 1 -
Nipple 015 Nipple 015 For connecting the return fuel line to fine filter through a bypass valve. 1 1 -
Nipple 016 Nipple 016 For joining single fuel line with heater line. 1 1 -
Nipple 016-01 Nipple 016-01 For joining two fuel lines with heater line. 1 1 -
Plug Plug For plugging the return line hole when tranferring the line. 1 1 -